[Tutorial] Ultimate no-root backup CWM MT6582 MT6592 MT6589 MT6589T MT6577 MT6595

Senjata yg Perlu Disiapkan :

Download and install ADB Drivers (PDAnet or auto-drivers recommended)

Download and extract latest MTK Droid Tool

Download and extract latest SP Flash Tool

 Langkah-Langkahnya :

Run MTK Droid Tool and save your scatter in an folder (How to make a scatter)

Detach your phone from PC and turn it off

Remove battery for a second and put it back in

Open SP Flash Tools

Load your scatter

Look at the Cache line and make a note (mental or otherwise) of the begin address

Go to Read back tab

Double click the existing line item

Select a save directory

In the pop-up box, select EMMC_PART_USER

Start address: 0x0000000000000000

This is where you'll need the address from #6. End address will be the begin address of Cache minus the first 8 0's. For example, if cache begin address is 0x0000000037000000, then you will enter 0x37000000

Click okay in the pop-up box

Click Read back

Attach your phone and the read back should begin

After read back is finished, open MTK Droid Tools again

Disconnect your phone

Turn your phone on

Connect phone. After a few seconds you should see your phone's info come up.

Click 'root, backup, recovery tab'

Click 'To process file ROM_ from FlashTool'

Direct MTK Droid Tool to the directory where you saved the ROM_ SP Flash Tool read back

Wait while it processes

At some point it will ask if you want to auto create/make CWM from boot. If you need CWM, go ahead and click yes.

If you clicked yes, it will create CWM and tell you the location. Regardless, it will continue to process the ROM. When finished, it will stop processing and show 'Task complete'.

You are now finished. Congrats. Assuming you did this for the purpose of backup. I recommend you also make an NVRAM backup as outlined Here or via Linux script method http://www.chinaphonearena.com/forum/Thr...RAM-Script

OPTIONAL: Because we didn't read back cache and user data, if you want to do use Firmware Upgrade as opposed to Download, you must edit your scatter and remove these portions as shown. Any normal text editor can do the job.